PrimoChill's Praxis Wetbench Powdercoated Steel Modular Open Air Computer Test Bench for Watercooling or Air Cooled Components

The Praxis Wetbench is the original PrimoChill test bench: a slanted, open steel frame with acrylic accents, made for water-cooled builds you want to see and reach. Choose a black or white frame and one of 13 accent colors.

Why builders choose the Wetbench

Slanted posture: The board leans toward you, so the build is easy to see, photograph and work on.

Your colors: A black or white frame with 13 accent colors. Accent kits are sold on their own, so the look can change later.

Ready for water cooling: Radiators from 120 to 360 mm or 140 to 280 mm, inside or outside the frame.

Open on every side: Nothing between you and the hardware, so swapping a card or a block takes minutes.

Fits a full build: mITX to eATX, an ATX power supply up to 300 mm, four drives and two 5.25" bays for a bay reservoir.

Switches included: Two 22 mm momentary vandal switches with cables, ready for power and reset.

Installing your Wetbench

Accents to the legs: Attach the acrylic accent pieces to the left and right legs.

Legs to the drive tray: Attach one leg at a time with the M3x10 socket caps, split washers and thumb nuts.

Power supply and bay mounts: Fit the PSU and 5.25" mounts to the tray with the nylon M4x8 screws.

Board tray: Add the acrylic accent and the motherboard standoffs to the motherboard tray.

Finish the bench: Connect the motherboard tray and the radiator tray to the bench with the M4x6 low-head screws.

The bench ships with all assembly hardware, a 2.5 mm hex key and the installation guide.

In the box

Test bench frame Acrylic accent kit Assembly hardware with 2.5 mm hex key 2x 22 mm momentary vandal switches, black 4x 2-pin switch cables Installation guide

Specifications

Frame: Powder-coated steel Accents: Acrylic Dimensions: 461.8 mm foot to foot, 483 mm front to back, 440 mm tall with the GPU bracket (330 mm without) Motherboards: mITX, mATX, ATX, eATX Power supply: ATX, up to 300 mm Drives: 4 HDD or SSD, up to 3.5" 5.25" bays: 2, fits a dual-bay reservoir Radiators: 120-360 mm or 140-280 mm, inside or outside; thick radiators mount outside Switches: 2x 22 mm vandal switches

Before you build ASUS boards with an M.2 slot near a standoff. On the ASUS Rampage V Extreme and some ASUS TUF boards, a standoff can block the M.2 slot. Add washers to the motherboard standoff screws, or use two M3 screws instead (extra hardware not included). Plan the standoffs. Fit the standoffs to match your board's layout before the board goes on. PrimoChill is not responsible for any hardware damage. Use at your own risk.