SKU: CS-476F208CDE6EC587Collection: UnionHollow Motefa Catalog
ReTerminal E1002 Full Color EPaper Display 6-Color E-ink Screen TRMNL ESP32-S3 Smart ESPHome Home Assistant Open Source

ReTerminal E1002 Full Color EPaper Display 6-Color E-ink Screen TRMNL ESP32-S3 Smart ESPHome Home Assistant Open Source

Category: General

SKU: CS-476F208CDE6EC587

Key Specifications

From product details
No-code route:
power on, join a 2.4GHz Wi-Fi network, open SenseCraft Seeedash and design the dashboard in the browser. AI Generator, Canvas, Gallery and RSS / Web Content are ready to use.
Maker route:
open the reTerminal E-Series Firmware Hub to generate an ESPHome YAML, or flash a demo firmware directly from desktop Chrome or Edge.

Product Highlights

  • At default settings. Actual battery life depends on how often the screen refreshes.
View Full Product Details & Specifications
Order Subtotal (1 item):
MYR 402.05
check_circle 3 available · Fulfillment subject to confirmation
Quantity:

Product Details & Specifications

ReTerminal E1002 Full Color EPaper Display 6-Color E-ink Screen TRMNL ESP32-S3 Smart ESPHome Home Assistant Open Source — reTerminal E1002 - 7.3" Full-Color E Ink Spectra 6 ePaper Smart Display A color ePaper display that stays on without a backlight and without daily charging Photos, recipes, chore charts, retail signage and colorful dashboards - visible at a glance, in full color, for months on a single charge Ships with Sense…

reTerminal E1002 - 7.3" Full-Color E Ink Spectra 6 ePaper Smart Display

A color ePaper display that stays on without a backlight and without daily charging. Photos, recipes, chore charts, retail signage and colorful dashboards - visible at a glance, in full color, for months on a single charge.

Fully assembled. No code required. Ships with SenseCraft Seeedash.

Power it on, join a 2.4GHz Wi-Fi network and build your first color dashboard in the browser. This is a complete terminal - not a DIY kit.

WHY YOU WILL LIKE IT

-

Real full color, not grayscale. E Ink Spectra 6 brings photos, charts and color-coded information to ePaper. 7.3" panel, 800 x 480, no backlight and no glare - the same paper-like readability, now in color.

-

Always on, barely ever charged. ePaper only draws power when it redraws the screen. A static image stays on display while the device sleeps. 2000mAh battery, up to ~3 months per charge at default settings.

-

No code, out of the box. SenseCraft Seeedash firmware is pre-installed. Describe a dashboard in plain text and let AI Generator lay it out, or use Canvas, Gallery and RSS / Web Content.

-

Five firmware paths, no lock-in. SenseCraft Seeedash, Home Assistant via ESPHome, TRMNL, Arduino and ESP-IDF. SquareLine Vision, EEZ Studio and Lopaka are also supported for visual UI design.

-

More than a screen. ESP32-S3 with 8MB PSRAM, 32MB Flash, microSD up to 32GB, onboard temperature and humidity sensor, buzzer, three user buttons, status LEDs, battery voltage monitoring, a reserved microphone and an 8-pin UART / I2C / GPIO header.

-

Built to sit out in the open. Metal enclosure, 176 x 120 x 53 mm with the stand and just 17 mm thin without it. Certified FCC / CE / TELEC / PSE / RoHS / UKCA.

SPECIFICATIONS

Display

7.3" full-color E Ink Spectra 6 ePaper, 800 x 480, no touch

Refresh

~15-20 s full refresh; no partial refresh

Processor

ESP32-S3 with 8MB PSRAM

Storage

32MB Flash, microSD up to 32GB (FAT32)

Wireless

2.4GHz Wi-Fi 802.11 b/g/n + Bluetooth 5.0

Onboard I/O

Temperature and humidity sensor, buzzer, 3 user buttons, status LEDs, reserved microphone, 8-pin header (UART / I2C / GPIO)

Battery

2000mAh rechargeable, up to ~3 months*, on-board voltage monitoring

Power input

USB-C 5V / 1A

Dimensions

176 x 120 x 53 mm with stand / 17 mm without stand

Working temperature

0-40 C

Enclosure

Metal

Certifications

FCC / CE / TELEC / PSE / RoHS / UKCA

In the box

Device, 3D-printed stand, USB-C cable, screws, screwdriver, quick start guide

  • At default settings. Actual battery life depends on how often the screen refreshes.

SET UP IN MINUTES

No-code route: power on, join a 2.4GHz Wi-Fi network, open SenseCraft Seeedash and design the dashboard in the browser. AI Generator, Canvas, Gallery and RSS / Web Content are ready to use.

Maker route: open the reTerminal E-Series Firmware Hub to generate an ESPHome YAML, or flash a demo firmware directly from desktop Chrome or Edge.

GOOD TO KNOW BEFORE YOU ORDER

  • 2.4GHz Wi-Fi only. 5GHz networks are not supported.
  • No touch panel. This is a glanceable information display, not a tablet.
  • Full color comes with a ~15-20 s full refresh and no partial refresh. Plan content that updates every few minutes rather than every second.
  • ~3 months battery life assumes default settings; frequent refreshes shorten it.
  • Under TRMNL, E1002 currently runs in monochrome mode. TRMNL BYOD access is a separate purchase and is not included.
  • microSD cards must be FAT32 and no larger than 32GB. The stand angle is fixed.
  • Refresh the screen at least once a day to avoid residual images. Operating range 0-40 C.
  • This is a complete, assembled terminal - not a DIY kit.

FREQUENT QUESTIONS

Q: Do I need to assemble it?

A: No. The body and screen arrive assembled. The 3D-printed stand, screws and screwdriver are included for quick attachment.

Q: Do I need to write code?

A: No. SenseCraft Seeedash firmware is pre-installed; AI Generator turns a plain-text description into a dashboard. ESPHome, Arduino and ESP-IDF are there when you want more control.

Q: Can it show Home Assistant data?

A: Yes, through ESPHome. The reTerminal E-Series Firmware Hub can generate a starter YAML for E1002.

Q: Is TRMNL included?

A: No. TRMNL BYOD access is a separate purchase from TRMNL, and E1002 currently runs in monochrome mode under TRMNL.

Q: How long does the battery last?

A: Up to ~3 months at default settings. More frequent refreshes use more power.

Q: Can it show my photos in color?

A: Yes. Gallery pushes images and slideshows to the panel over Wi-Fi, and a microSD card (up to 32GB, FAT32) can also store images locally.

Part List

reTerminal E1002 ePaper Display

X1

USB Type-C cable

X1

Display stand with screw

X1

Screw driver

X1

Frequently Bought Together
Combined listing price: MYR 678.87 Suggested from eligible marketplace listings; co-purchases and discounts are not verified.

Buyer Reviews (0)

Reviews for this product only.

No buyer reviews are available for this product yet.

More from this category

View category